Hardware

Another H-Bridge from New Micros

Posted 3 Oct 2002 at 23:37 UTC by steve Share This

New Micros announced the released another new H-Bridge product today. The NMIH-0050 H-bridge has DMOS output stages and operates in Forward (cw), Reverse (ccw), Brake high and Brake low modes. It delivers up to 5 A continuous and 6 A peak current and includes a nice, big heatsink. This is the second H-Bridge introduced by New Micros recently. Robots.net covered the previous release in August.

From their web page:

FEATURES:

  • Delivers up to 5 A continuous, 6 A peak current
  • Optimized for DC motor management applications
  • Operates at supply voltages up to 40V
  • Very low Rds ON; typ. 200m ohm @ 25 deg C per switch
  • Output full short circuit protected
  • Over temperature protection with hysteresis and diagnostic
  • Short circuit diagnosis with open drain error flag
  • Under voltage lockout
  • CMOS/TTL compatible inputs with hysteresis
  • No cross over current
  • Internal freewheeling diodes
  • Wide temperature range: -40 deg C < Tj < 150 deg C
  • Onboard LEDs for Overload detection, Motor Operation mode indication, and input signals for realtime debugging.
  • Terminal block for Motor power source and output connections.
  • Six pin single row header for input connections.
  • Heat sink

See more of the latest robot news!

Recent blogs

27 Jun 2016 Petar.Kormushev (Master)
25 Jun 2016 mwaibel (Master)
31 May 2016 steve (Master)
24 May 2016 shimniok (Journeyer)
2 May 2016 motters (Master)
6 Nov 2015 wedesoft (Master)
20 Oct 2015 Flanneltron (Journeyer)
10 Sep 2015 svo (Master)
6 May 2015 spirit (Journeyer)
14 Nov 2014 Sergey Popov (Apprentice)
X
Share this page